Electronics – Power-Distribution Components: 101 products found
Rating
- price: $16.99
PIONEER DUAL 10 GA. AMPLIFIER WIRING KIT
Customer Rating:
Everything you need to wire two amplifiers in a trunk. Or use both wire in parallel to double the current carrying capability. Kit includes 18 feet of dual wire siamesed 10 gauge red wire with an in-line Pioneer fuse holder on one end and a spade connector on the other. Two 4 feet lengths of black ground...
- price: $89.99
4 AWG Single-Amp Kit in Red/Black
Customer Rating:
StreetWires 4 Gauge Power Delivery Kits are the perfect answer for large or multiple amplifier installations. They feature everything the DIY installer needs, making the task of installing your new system quick and painless. All StreetWires Power Delivery Kits feature the correct parts to do the job...
- price: $49.99
8 AWG Power Kit with Interconnects in Red
Customer Rating:
StreetWires 8 Gauge Power Delivery Kits are the perfect answer for single amplifier installations. They feature everything the DIY installer needs, making the task of installing your new system quick and painless. All StreetWires Power Delivery Kits feature the correct parts to do the job right the...
- price: $18.95
TSUNAMI RT908P RING TERMINALS 8 AWG PAIR
Customer Rating:
These high-performance 5/16" ring terminals are made with Tsunami's CNC Titanium Technology and feature their exclusive Lok-Nut™ wire termination system. The Lok-Nut™ system employs a compression style fitting that combines ease of installation with superior electrical conductivity. Titanium finish...
- price: $64.95
TSUNAMI FDB1004-MANL 4 POSITION FUSE BLOCK w/METER
Customer Rating:
Tsunami’s new 1000 Series Fused Distribution Blocks now offer built-in digital voltage meters with blue displays and status LEDs in a new design package that will add a special Pro-Street look to your amp rack. Not only do these special blocks provide important lighted system status information, but...
- price: $19.95
TSUNAMI RT904P RING TERMINALS 4 AWG PAIR
Customer Rating:
These high-performance 5/16" ring terminals are made with Tsunami's CNC Titanium Technology and feature their exclusive Lok-Nut™ wire termination system. The Lok-Nut™ system employs a compression style fitting that combines ease of installation with superior electrical conductivity. Titanium finish...
- price: $19.95
TSUNAMI BT10N NEGATIVE BATTERY TERMINAL
Customer Rating:
The BT10MP has a durable nickel finish and comes with clear plastic covers, and matches the BT10MP positive terminal with built-in digital voltage meter, sold separately....
- price: $24.95
TSUNAMI RT910P RING TERMINALS 1/0 AWG PAIR
Customer Rating:
These high-performance 5/16" ring terminals are made with Tsunami's CNC Titanium Technology and feature their exclusive Lok-Nut™ wire termination system. The Lok-Nut™ system employs a compression style fitting that combines ease of installation with superior electrical conductivity. Titanium finish...
- price: too low!
EFX PDB2i Fused Distribution Block 2-way AGU fused block (Iced Platinum-plated)
Customer Rating:
Platinum-coated brass * 4-gauge input * two 8-gauge outputs * requires AGU glass fuses...
- price: $49.95
StreetWires DB0240 Expandable Dist Block
Customer Rating:
There is no higher-performing option for power distribution than StreetWires power blocks. For the highest current delivery with the lowest power loss, StreetWires power blocks are machined from solid brass billet, then pulse-plated with Diamond Plate Nickel. Two-Step Termination wire cavities are up...
- price: $24.95
StreetWires DB048 Distribution Block
Customer Rating:
There is no higher-performing option for power distribution than StreetWires power blocks. For the highest current delivery with the lowest power loss, StreetWires power blocks are machined from solid brass billet, then pulse-plated with Diamond Plate Nickel. Two-Step Termination wire cavities are up...
- price: $29.99
AMPLIFIER INSTALLATION KIT 8 GA.
Customer Rating:
This kit makes amplifier installation a breeze for the beginner or seasoned professional. Complete kit includes all the hardware and wire needed to install a high powered amplifier system in the trunk or back compartment of your car, small SUV, or jeep. Includes 16 ft. high quality low signal loss shielded...
- price: too low!
Customer Rating:
Solid brass block with connections for (1) 4 ga. wire input from battery and (4) 8 ga. wire outputs for power to the amplifiers.Recessed set screws hold the wire in place.Brass block is completely insulated with clear plastic to prevent accidental shorting....
- price: too low!
BATTERY POST TERMINAL POS/NEG PR
Customer Rating:
High quality gold plated battery clamp pair. Perfect for upgrading from original factory clamps. Stamped with polarity symbols for easy identification....
- price: too low!
StreetWires Combo AGU Fused Distribution Block 4-way/4-gauge
Customer Rating:
Diamond Plate Nickel-plated machined brass with gold details * power outputs and ground inputs accept 4- or 8- gauge cable * Power Ring® power input and ground output accept any gauge cable...
- price: too low!
StreetWires FBR24A Distribution Block with 2 Fused (AGU) Outputs
Customer Rating:
Polycarbonite cover and base * power input accepts1/0- to 8-gauge cable * 2-gauge and 8-gauge fusedoutputs...
- price: $64.95
TSUNAMI FDB1004-AGU 4 POSITION FUSE BLOCK w/METER
Customer Rating:
Tsunami’s new 1000 Series Fused Distribution Blocks now offer built-in digital voltage meters with blue displays and status LEDs in a new design package that will add a special Pro-Street look to your amp rack. Not only do these special blocks provide important lighted system status information, but...
- price: $17.95
Customer Rating:
Is your amp rack a mess? Are your power cables all over the place? Tsunami has the solution! Tsunami cable clamps offer a great looking and practical method of organizing and retaining 1/0, 2, 4, and 8 gauge cables. Using extruded aluminum mounting strips and molded chrome finish plastic snap-in clamps...
- price: too low!
Rockford Fosgate RP7442 Platinum-Plated Capacitor Distribution Block
Customer Rating:
Organize your multi-amp setup with the RP7442 platinum-plated distribution block, which attaches to the top of capacitors with bolt spacings of 1.08" to 1.5" (including Rockford Fosgate and Lightning Audio caps). The handy block features two 4-gauge power inputs, two 4-gauge ground inputs, three 8-gauge...
- price: $119.95
TSUNAMI FDB9104-MANL FUSE BLOCK w/LEDS AND DISPLAY
Customer Rating:
Tsunami's new FDB9104-AGU fuse blocks offer a new look that will "tune up" any amp rack and maintain high performance power distribution. The blocks feature bright nickel-plated solid brass construction, easy-to-see two-color LEDs for fuse status, and high current capability for maximum amplifier performance...