Camera & Photo – Other Telescope Accessories: 861 products found
Price
- price: too low!
Orion Radial Aluminum Focus Wheels
Customer Rating:
The best-looking cars always sport a great set of wheel hubs. Well, the same goes for telescopes. Swap out those standard-issue, plastic focus knobs with a pair of these machined metal mags, and you'll be cruising the night sky in style. They'll give your pride and joy an expensive new look and a more...
- price: too low!
Customer Rating:
The easiest way to aim a telescope. The view seen through the window of the Telrad is continuos with the sky around it, not magnifed or upside down. Three rings are lighted and appear to lie among the stars. The small ring outlines the Moon-sized area seen in the telescope. the large outer ring outlines...
- price: too low!
Orion SkyLine Green Laser Pointer, 1mW-3mW
Customer Rating:
Have you ever wanted to point out the Orion Nebula, or trace the outline of the Sagittarius "Teapot" for someone? You point your finger, but that just doesn't cut it. "Where? You mean the third star up from that pine tree over there?" The SkyLine green laser pointer is perfect for stargazers. Its thin...
- price: too low!
Orion LR-44 Batteries, package of 3
Customer Rating:
Replacement batteries for Orion's LaserMate Collimator. Set of three....
- price: too low!
Orion Polar Alignment Scope for SkyView Pro Mount
Customer Rating:
The Polar-Axis finder Scope enables highly accurate polar alignment of the SkyView Pro equatorial mount. Accurate polar alignment is essential for precise tracking, especially at high powers, and for astrophotographic guiding. This accessory threads into the mount's housing along the Right Ascension...
- price: too low!
Customer Rating:
If you have more than one telescope you can use your Telrad Finder on both telescopes by getting an additional mounting base....
- price: too low!
Adorama Dew Shield for Telrad Finder
Customer Rating:
The Telrad Dew Shield helps keep condensation from forming on the glass plate of your Telrad. It can be flipped completely over the glass while you're getting that cup of coffee and then rotated upward to allow you to see through to the sky....
- price: too low!
Customer Rating:
This cable connects the IntelliScope Computerized Object Locator to a serial port on your personal computer, allowing the use of astronomy software such as Starry Night Pro or TheSky6 Professional Edition to control the IntelliScope....
- price: too low!
Orion Lights Out Observing Canopy
Customer Rating:
It's what photographers have used for decades. Drape this pitch-black, double-layer canopy over your head and your telescope's eyepiece to block out that annoying porch light, streetlight-all unwanted light. The objects you're viewing will appear brighter, with greater detail and better contrast. Ideal...
- price: too low!
Orion Telescope Tube Rings, 140mm ID
Customer Rating:
These cast-aluminum rings feature quick-release, hinged clamp knobs and felt lining. They are designed for use with the Orion EQ-1, EQ-2, EQ-3, or AZ-3 mounts, and may fit some other mounts as well. One of the two rings in each set has a 1/4"-20 piggyback camera adapter on it, the other has a threaded...
- price: too low!
Orion Telescope Tube Rings, 144mm ID
Customer Rating:
Hinged, cast-aluminum rings with felt lining. Designed for use with Orion SkyView Pro and Atlas equatorial mounts; and may fit some other mounts as well. One ring in each set has a 1/4"-20 piggyback camera adapter, the other has a threaded 1/4"-20 hole. Sold in sets of two rings. Mounting bolts and...
- price: too low!
Orion Standard Rubber Eyeguard, 1.25"
Customer Rating:
Soft Rubber Eyeguard Blocks annoying ambient light and helps you position your eye. Especially important for wide-field eyepieces. Stretches to fit most 1.25" eyepieces. Contoured Eyeguard This low-profile rubber eyeguard shields out light coming from the side. Fits nearly all 1.25" telescope eyepieces...
- price: too low!
Orion Winged Rubber Eyeguard, 1.25"
Customer Rating:
Soft Rubber Eyeguard Blocks annoying ambient light and helps you position your eye. Especially important for wide-field eyepieces. Stretches to fit most 1.25" eyepieces. Contoured Eyeguard This low-profile rubber eyeguard shields out light coming from the side. Fits nearly all 1.25" telescope eyepieces...
- price: too low!
Orion Set of 3 Standard Eyeguards
Customer Rating:
Soft Rubber Eyeguard Blocks annoying ambient light and helps you position your eye. Especially important for wide-field eyepieces. Stretches to fit most 1.25" eyepieces. Contoured Eyeguard This low-profile rubber eyeguard shields out light coming from the side. Fits nearly all 1.25" telescope eyepieces...
- price: too low!
Orion Set of 3 Winged Eyeguards
Customer Rating:
Soft Rubber Eyeguard Blocks annoying ambient light and helps you position your eye. Especially important for wide-field eyepieces. Stretches to fit most 1.25" eyepieces. Contoured Eyeguard This low-profile rubber eyeguard shields out light coming from the side. Fits nearly all 1.25" telescope eyepieces...
- price: too low!
Orion Telescope Tube Rings, 116mm ID
Customer Rating:
These cast-aluminum rings feature quick-release, hinged clamp knobs and felt lining. They are designed for use with the Orion EQ-1, EQ-2, EQ-3, or AZ-3 mounts, and may fit some other mounts as well. One of the two rings in each set has a 1/4"-20 piggyback camera adapter on it, the other has a threaded...
- price: too low!
Orion Telescope Tube Rings, 100mm ID
Customer Rating:
These cast-aluminum rings feature quick-release, hinged clamp knobs and felt lining. They are designed for use with the Orion EQ-1, EQ-2, EQ-3, or AZ-3 mounts, and may fit some other mounts as well. One of the two rings in each set has a 1/4"-20 piggyback camera adapter on it, the other has a threaded...
- price: too low!
Orion Telescope Tube Rings, 90mm ID
Customer Rating:
These cast-aluminum rings feature quick-release, hinged clamp knobs and felt lining. They are designed for use with the Orion EQ-1, EQ-2, EQ-3, or AZ-3 mounts, and may fit some other mounts as well. One of the two rings in each set has a 1/4"-20 piggyback camera adapter on it, the other has a threaded...
- price: too low!
Orion Telescope Tube Rings, 76mm ID
Customer Rating:
Our cast-aluminum tube rings feature quick-release, hinged clamp knobs and felt lining. Designed for use with Orion mounts, they fit some other brands of mounts as well. One of the two rings in each set has a 1/4"-20 piggyback camera adapter on it, the other has a threaded 1/4"-20 hole. The piggyback...
- price: too low!
Customer Rating:
Keep your eyepieces within convenient reach with these inexpensive add-ons. Aluminum racks attach easily to the sideboard of any Dobsonian base and feature keyhole slots for quick release. Mounting screws included. 3-Eyepiece rack holds three 1.25" eyepieces. 4-Eyepiece rack hold three 1.25" eyepieces...