Enjoy great sound from your favorite music without giving your house over to bulky, imposing loudspeakers. The AudioSource IC6S in-ceiling speakers sit nearly flush with your ceiling in unobtrusive white (you can also paint the grilles to match your existing color), delivering clear, full-bodied stereo sound from positions of your choice. Their extended high-frequency response lends them to music appreciation from high-resolution audio media like DVD-Audio and SACD.

The discrete, compact format of these AudioSource speakers makes them ideal for applications where traditional speakers would be impractical or impossible. Each speaker measures just 9 inches across and sits 3.25 inches deep (within your ceiling). The speakers may be used wherever you need to conserve space or wherever you'd to bring music to additional rooms in the house, augmenting a traditional stereo set in your main listening area. You could even use them for home theater surround speakers (rear left/right), though most movies and multichannel music releases are mixed for more direct listening.

The IC6S speakers offer 90 dB sensitivity, which makes them easily driven by modest amplifiers. They're rated for use with amps pushing up to 75 watts per channel.

Once installed, the in-ceiling speakers are not easily moved or repositioned. Take a little extra time to carefully consider a good location before you begin your installation. Unlike traditional speakers, in-wall/in-ceiling speakers mount flush and cannot be angled or aimed back into the listening area from the corners of a room. As a general rule, the speakers should be mounted close to, or above, ear level, and at least one-third of the distance from the corner of the room to the center of the wall or ceiling in which you will mount them.

The speaker terminals will accommodate up to 16-gauge speaker wire (wire not included), which should be used for longer connections (greater than 50 feet of wire). For shorter distances, 18- or 20-gauge speaker wire will be adequate. Leave about two feet of extra wire at the speaker end to make installation and positioning of the speaker easier.

What's in the Box
Two speakers, 2 grilles, a paper mounting template, putty (for tightening the grille fit, if necessary), and a user's manual.

Note: Installation is required for use of these speakers. Hookup requires ceiling incisions and running speaker wires (not included) through your ceiling to the speakers.